Namur Plate Installation Solenoid Valve
Description
4M310-08:The Namur plate installation solenoid valve is with high flow, which can be directly installed on any position of the pneumatic actuator on the NAMUR interface, providing fault safety function through the pilot shaft design with spring and air reflux.
Features:
1. Installed on the side panel, the surface is upward, and can be directly connected with the actuator. It is equipped with manual accessory device for easy installation and debugging.
2. Various standard voltage levels can be selected.
3. High-Flow series delivers fail-safe functionality through pilot-operated spool design with combined spring and air return.
Specifications:
4V300 Series Solenoid Valve, Pneumatic Control Valve | ||||||||||
Model | 4M310-08 | 4M320-08 | 4M330C-08 | 4M330E-08 | 4M330P-08 | 4M310-10 | 4M320-10 | 4M330C-10 | 4M330E-10 | 4M330P-10 |
4A310-08 | 4A320-08 | 4A330C-08 | 4A330E-08 | 4A330P-08 | 4A310-10 | 4A320-10 | 4A330C-10 | 4A330E-10 | 4A330P-10 | |
Position and Way NO. | Two-position Five-way | Three-position Five-way | Two-position Five-way | Three-position Five-way | ||||||
Effective Sectional Area | 25mm²(CV=1.4) | 18mm²(CV=1.00) | 30mm²(CV=1.68) | 18mm²(CV=1.00) | ||||||
Port Size | Air inlet=Air Outlet=Exhaust=G1/4″ | Air inlet=Air Outlet=G3/8′ Exhaust=G1/4″ | ||||||||
Working Medium | Air (40Micron Filtered) | |||||||||
Acting Type | Inner Guide Type | |||||||||
Working Pressure | 0.15~0.8MPa | |||||||||
Max.Pressure Resisance | 1.2MPa | |||||||||
Working Temperature | 5~50°C | |||||||||
Voltage Range | ±10% | |||||||||
Power Consumption | AC:5.5VA DC:4.8W | |||||||||
Insulation& Protection Class | F Class. IP 65 | |||||||||
Wiring Form | Lead wire or Connector type | |||||||||
Max. Frequency | 5 Cycle/Secretary | |||||||||
Shortest Activate Time | 0.05 Second |